Open as PDF
Set the printing effects.
Set as necessary.
Turn the <5> dial to select the item
on the upper right, then press <0>.
If the <e> icon is displayed next to
<z>, the printing effects can also
be adjusted. (p.140)
Next, turn the <5> dial to select the
desired printing effect, then press
* The screen display may differ depending on the printer.
* When the printing effects are changed, the changes will be reflected on the
screen. However, the actual result of the printing effects might look different
from what you see on screen. The screen only shows an approximate rendition.
This also applies to [Brightness] and [Adjust levels] on page 140.
Same as the printing characteristics turned “On”. No automatic
correction will be performed.
The image will be printed according to the printer’s standard
colors. The image’s Exif data is used to make automatic
The image will be printed with higher saturation to produce
more vivid blues and greens.
The image noise is reduced before printing.
Prints in black-and-white with true blacks.
0 Cool tone
Prints in black-and-white with cool, bluish blacks.
Prints in black-and-white with warm, yellowish blacks.
Prints the image in the actual colors and contrast. No automatic
color adjustments will be applied.
The printing characteristics are the same as the “Natural”
setting. However, this setting enables finer printing adjustments
than with “Natural.”
The printing will differ depending on the printer. For details, see
the printer’s instruction manual.