Open as PDF
The date/time (back-up) battery maintains the camera’s date and time.
Its service life is about 5 years. If the date/time is reset when the battery
is replaced, replace the back-up battery with a new CR2016 lithium
battery as described below.
The date/time setting will also be reset, so be sure to set the
Set the power switch to <2>.
Remove the battery.
Take off the battery holder.
Replace the battery.
Make sure the battery is in the proper
Insert the battery holder.
Then load the battery and close the
Replacing the Date/Time Battery
For the date/time battery, be sure to use a CR2016 lithium battery.