Filter
Top Products
120
Setting Exposure CompensationN
Set flash exposure compensation if the flash exposure of the subject
does not come out as desired. You can set the exposure compensation
up to ±2 stops in 1/3-stop increments.
1
Press the <Q> button. (7)
X The Quick Control screen will appear
(p.44).
2
Select [y].
Press the <S> key to select [y*].
X [Flash exposure comp.] will be
displayed at the bottom.
3
Set the exposure compensation amount.
To make the flash exposure brighter,
turn the <6> dial to the right
(increased exposure). To make it
darker, turn the <6> dial to the left
(decreased exposure).
X When you press the shutter button
halfway, the <y> icon will appear in
the viewfinder.
After taking the picture, cancel the
flash exposure compensation by
setting it back to 0.
y Flash Exposure Compensation
If [z2: Auto Lighting Optimizer] (p.125) is set to any setting other than
[Disable], the image may look bright even if a decreased exposure
compensation or decreased flash exposure compensation is set.
You can also set flash exposure compensation with [Built-in flash settings]
in [z1: Flash control] (p.220).
COPY