Filter
Top Products
122
3 Auto Exposure BracketingN
Follow steps 1 and 2 to turn off the AEB level display.
The AEB setting will also be canceled automatically if the power
switch is set to <2>, flash recycling is completed, etc.
Using AEB with continuous shooting
If <i> continuous shooting (p.104) is set and you press the shutter
button completely, the three bracketed shots will be taken
continuously in this sequence: standard exposure, decreased
exposure, and increased exposure.
Using AEB with <u> single shooting
Press the shutter button three times to take the three bracketed
shots. The three bracketed shots will be exposed in the following
sequence: standard exposure, decreased exposure, and increased
exposure.
Using AEB with the self-timer or a remote controller (sold
separately)
With the self-timer or a remote control shooting (<Q> or <l>),
you can take three continuous shots after a 10-sec. or 2-sec. delay.
With <q> (p.106) set, the number of continuous shots will be three
times the number set.
Canceling AEB
Shooting Tips
AEB cannot be used with flash, Multi Shot Noise Reduction, Creative
filters, or bulb exposures.
If [z2: Auto Lighting Optimizer] (p.125) is set to any setting other
than [Disable], the AEB’s effect may be minimal.
COPY