Filter
Top Products
Troubleshooting Guide
330
Under [z1: Flash control], set [Flash sync. speed in Av mode] to
[Auto] (p.219).
The built-in flash’s pop-up mechanism moves slightly. This is normal.
If you use flash, the shutter will make two sounds each time you shoot
(p.147).
It indicates that the camera’s internal temperature is high. If the white
<s> icon is displayed, the still photo’s image quality may deteriorate.
If the red <E> icon is displayed, it indicates that the Live View or
movie shooting will soon stop automatically (p.171, 200).
If the card’s writing speed is slow, movie shooting may stop
automatically. Use an SD Speed Class 6 “ ” or faster card. To
find out the card’s read/write speed, refer to the card manufacturer’s
Web site, etc.
If the movie shooting time reaches 29 min. 59 sec., the movie shooting
will stop automatically.
High-speed sync cannot be set in the <f> mode.
The camera makes a noise when it is shaken.
The shutter makes two shooting sounds during Live View
shooting.
During Live View and movie shooting, a white <s> or
red <E> icon is displayed.
Movie shooting stops by itself.
COPY