Filter
Top Products
333
Troubleshooting Guide
Make sure the correct date and time has been set (p.36).
Check the time zone and daylight savings time (p.36).
The shooting date and time does not appear in the picture. The date
and time is instead recorded in the image data as shooting
information. When printing, you can imprint the date and time in the
picture by using the date and time recorded in the shooting information
(p.285).
If the card has recorded a number of images greater than the camera
can display, [###] will be displayed (p.249).
If the LCD monitor is dirty, use a soft cloth to clean it.
In low or high temperatures, the LCD monitor display may seem slow
or may look black. It will return to normal at room temperature.
[Eye-Fi settings] will appear only when an Eye-Fi card is inserted in
the camera. If the Eye-Fi card has a write-protect switch set to the
LOCK position, you will not be able to check the card’s connection
status or disable Eye-Fi card transmission (p.311).
The shooting date and time displayed is incorrect.
The date and time is not in the picture.
[###] is displayed.
The LCD monitor does not display a clear image.
[Eye-Fi settings] does not appear.
COPY