Filter
Top Products
3 Custom Function SettingsN
302
C.Fn-7 Assign SET button
You can assign a frequently-used function to <0>. Press <0> when the
camera is ready to shoot.
0: Normal (disabled)
1: Image quality
Press <0> to display the image-recording quality setting screen on the
LCD monitor. Select the desired image-recording quality, then press
<0>.
2: Flash exposure compensation
When you press <0>, the flash exposure compensation setting screen
will appear. Set the flash exposure compensation, then press <0>.
3: LCD monitor On/Off
Assigns the same function as the <B> button.
4: Menu display
Press <0> to display the menu screen.
5: ISO speed
The ISO speed setting screen will appear. Press the <U> key or turn
the <6> dial to change the ISO speed. You can also refer to the
viewfinder to set the ISO speed.
C.Fn-8 LCD display when power ON
0: Display on
When the power switch is turned on, the shooting settings will be
displayed (p.50).
1: Previous display status
If you pressed the <B> button and turned off the camera while the
LCD monitor was off, the shooting settings will not be displayed when
you turn on the camera again. This helps to save battery power. The
menu screens and image playback will still be displayed when used.
If you pressed the <B> button to display the shooting settings and
then turn off the camera, the shooting settings will be displayed when
you turn on the camera again.
COPY