Canon 9338B001 Digital Camera User Manual


  Open as PDF
of 196
 
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
15
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
2 Setthedateandtime.
Press the <q><r> buttons to choose an
option.
Press the <o><p> buttons or turn the
<5> dial to specify the date and time.
When nished, press the <m> button.
3 Setthehometimezone.
Press the <q><r> buttons to choose
your home time zone.
4 Finishthesetupprocess.
Press the <m> button when nished.
After a conrmation message, the setting
screen is no longer displayed.
To turn off the camera, press the ON/OFF
button.
•Unless you set the date, time, and home time zone, the [Date/Time]
screen will be displayed each time you turn the camera on.
Specify the correct information.
• To set daylight saving time (1 hour ahead), choose [ ] in step 2 and then
choose [
] by pressing the <o><p> buttons or turning the <5> dial.
ChangingtheDateandTime
Adjust the date and time as follows.
1 Accessthecameramenu.
Press the <n> button.
2 Choose[Date/Time].
Move the zoom lever to choose the [3]
tab.
Press the <o><p> buttons or turn the
<5> dial to choose [Date/Time], and
then press the <m> button.
3 Changethedateandtime.
Follow step 2 in “Setting the Date and
Time” (=
15) to adjust the settings.
Press the <n> button to close the
menu.
• Date/time settings can be retained for about 3 weeks by the camera’s built-in
date/time battery (backup battery) after the battery pack is removed.
• The date/time battery will be charged in about 4 hours once you insert a
charged battery pack or connect the camera to an AC adapter kit (sold
separately, =
156), even if the camera is left off.
• Once the date/time battery is depleted, the [Date/Time] screen will be
displayed when you turn the camera on. Set the correct date and time as
described in “Setting the Date and Time” (=
14).
 previous next