Filter
Top Products
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
85
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Still Images
Specic Shutter Speeds ([Tv] Mode)
Set your preferred shutter speed before shooting as follows. The camera
automatically adjusts the aperture value to suit your shutter speed.
For details on available shutter speeds, see “Shutter Speed” (=
191).
1 Enter[M]mode.
Set the mode dial to [M].
2 Settheshutterspeed.
Turn the <5> dial to set the shutter
speed.
•In shooting conditions requiring slower shutter speeds, there will
be a delay before you can shoot again, as the camera processes
images to reduce noise.
•When shooting at low shutter speeds on a tripod, you should set
[IS Mode] to [Off] (=
82).
•Maximum shutter speed with the ash is 1/2000 second. If you
specify a faster speed, the camera will automatically reset the speed
to 1/2000 second before shooting.
•Orange display of aperture values when you press the shutter
button halfway indicates that the settings deviate from standard
exposure. Adjust the shutter speed until the aperture value is
displayed in white, or use safety shift (=
85).
• [M]: Time value
Still Images
Specic Aperture Values ([Av] Mode)
Set your preferred aperture value before shooting as follows. The camera
automatically adjusts the shutter speed to suit your aperture value.
For details on available aperture values, see “Aperture” (=
191).
1 Enter[B]mode.
Set the mode dial to [B].
2 Settheaperturevalue.
Turn the <5> dial to set the aperture
value.
•Orange display of shutter speeds when you press the shutter button
halfway indicates that the settings deviate from standard exposure.
Adjust the aperture value until the shutter speed is displayed in
white, or use safety shift (see below).
• [B]: Aperture value (size of the opening made by the iris in the lens)
• To avoid exposure problems in [M] and [B] modes, you can have the
camera automatically adjust the shutter speed or aperture value, even when
standard exposure cannot otherwise be obtained. Press the <n> button
and set [Safety Shift] on the [4] tab to [On] (=
24).
However, safety shift is disabled when the ash res.