Filter
Top Products
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
87
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Still Images
Adjusting the Flash Output
Choose from the three ash levels in [D] mode.
1 Enter[D]mode.
Set the mode dial to [D].
2 Congurethesetting.
Press the <m> button, choose [X] in
the menu, and adjust the setting by either
pressing the <o><p> buttons or turning
the <
5
> dial (=
23).
Once the setting is complete, the ash
output level is displayed.
[
]: low, [ ]: medium, [ ]: high
• You can also set the ash level by accessing MENU (=
24) and choosing
[4] tab > [Flash Settings] > [Flash Output].
• You can set the ash level in [M] or [B] mode by accessing MENU
(=
24) and choosing [4] tab > [Flash Settings] > [Flash Mode] > [Manual].
• You can also access the [Flash Settings] MENU screen when the ash is up by
pressing the <r> button and immediately pressing the <n> button.