Canon 9544B001 Digital Camera User Manual


 
106
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode /
Hybrid Auto Mode
3
Other Shooting Modes
4
P Mode
6
Playback Mode
5
Tv, Av, and M Mode
7
Setting Menu
8
Accessories
9
Appendix
Index
Vignetting may occur if you use the built-in ash when the lens
hood is attached.
The lter adapter and a lens hood cannot be attached to the
camera at the same time.
Using Lens Filters (Sold Separately)
Still Images
Movies
Attaching a lens lter to the camera protects the lens and allows you
to shoot with various effects. To attach a lens lter, you will need Filter
Adapter FA-DC67A (sold separately).
1
Attach the lter adapter.
Make sure the camera is off.
Align the notches on the camera and the
lter adapter and turn the adapter in the
direction of the arrow until locked.
To remove the lter adapter, turn it in the
opposite direction.
2
Attach a lter.
Turn the lter in the direction of the arrow
to attach it to the camera.
Make sure not to attach the lter too
tightly. Doing so could prevent removal of
the lter and damage the camera.
Do not disconnect the adapter or unplug the power cord while
the camera is still on. This may erase your shots or damage the
camera.
Do not attach the adapter or adapter cord to other objects. Doing
so could result in malfunction or damage to the product.
Using a Lens Hood (Sold Separately)
Still Images
Movies
For wide-angle shots of backlit subjects without using the ash, attach
optional Lens Hood LH-DC60 to prevent light outside the angle of view
from entering the lens.
Make sure the camera is off.
Align the lens hood mark (2) with the
camera mark (1), and turn the lens hood
in the direction of the arrow until it locks
in place.
To remove the lens hood, turn it in the
opposite direction.
To attach the lens hood inverted (as
shown) when the hood is not used, align
the lens hood mark (2) with the camera
mark (1), and turn the lens hood in the
direction of the arrow until it locks in
place.
(1)
(2)
(1)
(2)