49
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode /
Hybrid Auto Mode
3
Other Shooting Modes
4
P Mode
6
Playback Mode
5
Tv, Av, and M Mode
7
Setting Menu
8
Accessories
9
Appendix
Index
Image Display during Playback
The six images from each shot are managed together as a group, and
only the rst image in the series is displayed during playback. To indicate
that the image is part of a group, [ ] is displayed in the upper left of
the screen.
● If you erase a grouped image (
=
84), all images in the group
are also erased. Be careful when erasing images.
● Grouped images can be played back individually (
=
79) and
ungrouped (
=
79).
● Protecting (
=
82) a grouped image will protect all images in
the group.
● Grouped images can be viewed individually when played back
using Image Search (
=
77) or Smart Shufe (
=
81). In this
case, images are temporarily ungrouped.
● The following actions are not available for grouped images:
magnifying (
=
80), tagging as favorites (
=
87), editing
(
=
88), printing (
=
110), setting up individual image printing
(
=
114), or adding to a photobook (
=
116). To do these
things, either view grouped images individually (
=
79) or
cancel grouping (
=
79) rst.
● Simultaneous display as shown in step 2 is only available
immediately after you shoot.
Enjoying a Variety of Images from
Each Shot (Creative Shot)
Still Images
Movies
The camera determines the subject and shooting conditions, automatically
applying special effects and recomposing the shot to emphasize the
subject. Six still images are recorded for each shot. You can capture
multiple still images with effects using camera-determined settings.
1
Enter [ ] mode.
● Set the mode dial to [ ].
2
Shoot.
● Press the shutter button all the way
down. As you shoot, the shutter sound is
played three times.
● After the six images are displayed
in succession, they are displayed
simultaneously for about two seconds.
● To keep the images displayed until you
press the shutter button halfway, press
the [
] button. For full-screen display in
this state, choose an image by pressing
the [ ][ ][ ][ ] buttons, and then press
the [ ] button.
● To return to the original display, press the
[
] button.
● Shooting will take some time when the ash res, but hold the
camera steady until the shutter sound is played three times.