56
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode /
Hybrid Auto Mode
3
Other Shooting Modes
4
P Mode
6
Playback Mode
5
Tv, Av, and M Mode
7
Setting Menu
8
Accessories
9
Appendix
Index
High-Speed Continuous Shooting (High-Speed
Burst)
Still Images
Movies
You can shoot a series of shots in rapid succession by holding the shutter
button all the way down. For details on the continuous shooting speed,
see “Continuous Shooting Speed” (
=
136).
1
Choose [ ].
● Follow steps 1 – 2 in “Specic Scenes”
(
=
50) and choose [ ].
2
Shoot.
● Hold the shutter button all the way down
to shoot continuously.
● The resolution is [ ] (2304 x 1728) and cannot be changed.
● Focus, image brightness, and color are determined by the rst
shot.
● Shooting may stop momentarily or continuous shooting may slow
down depending on shooting conditions, camera settings, and the
zoom position.
● As more shots are taken, shooting may slow down.
2
Compose the shot and press the
shutter button halfway.
● Make sure a green frame is displayed
around the face you focus on and white
frames around other faces.
3
Press the shutter button all the way
down.
● The camera now enters shooting standby
mode, and [Look straight at camera to
start count down] is displayed.
● The lamp blinks and the self-timer sound
is played.
4
Join the subjects in the shooting
area and look at the camera.
● After the camera detects a new face, the
lamp blinking and self-timer sound will
speed up. (When the ash res, the lamp
will remain lit.) About two seconds later,
the camera will shoot.
● To cancel shooting after you have
triggered the self-timer, press the
[
] button.
● Even if your face is not detected after you join the others in the
shooting area, the camera will shoot about 15 seconds later.
● To change the number of shots, press the [
][ ] buttons
after choosing [
] in step 1. [Blink Detection] (
=
45) is only
available for the nal shot.
● The zoom factor cannot be changed with the [
] button after you
press the shutter button all the way down.