121
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode /
Hybrid Auto Mode
3
Other Shooting Modes
4
P Mode
6
Playback Mode
5
Tv, Av, and M Mode
7
Setting Menu
8
Accessories
9
Appendix
Index
Memory Card
The memory card is not recognized.
● Restart the camera, with the memory card in it (
=
23).
Computer
Cannot transfer images to a computer.
● When attempting to transfer images to the computer via a cable, try reducing the
transfer speed as follows.
- Press the [
] button to enter Playback mode. Hold the [ ] button
down as you press the [
] and [ ] buttons at the same time. On the next
screen, press the [
][ ] buttons to choose [B], and then press the [ ] button.
Eye-Fi Cards
Cannot transfer images (
=
117).
Shooting Movies
The elapsed time shown is incorrect, or recording is interrupted.
● Use the camera to format the memory card, or switch to a card that supports
high-speed recording. Note that even if the elapsed time display is incorrect, the
length of movies on the memory card corresponds to the actual recording time
(
=
97,
=
135).
[ ] is displayed and shooting stops automatically.
● The camera’s internal memory buffer lled up as the camera could not record to
the memory card quickly enough. Try one of the following measures.
- Use the camera to perform low-level formatting of the memory card (
=
98).
- Lower the image quality (
=
43).
- Switch to a memory card that supports high-speed recording (
=
135).
Zooming is not possible.
● Zooming is not possible when shooting movies in [ ] mode (
=
52).
Subjects look distorted.
● Subjects that pass in front of the camera quickly may look distorted. This is not a
malfunction.
Playback
Playback is not possible.
● Image or movie playback may not be possible if a computer is used to rename
les or alter the folder structure. Refer to “Software Instruction Manual” (
=
107)
for details on folder structure and le names.
Playback stops, or audio skips.
● Switch to a memory card that you have performed low-level formatting on with the
camera (
=
98).
● There may be brief interruptions when playing movies copied to memory cards
that have slow read speeds.
● When movies are played on a computer, frames may be dropped and audio may
skip if computer performance is inadequate.
Sound is not played during movies.
● Adjust the volume (
=
94) if you have activated [Mute] (
=
94) or the sound
in the movie is faint.
● No sound is played for movies shot in [
] mode (
=
52) because audio is not
recorded in this mode.