Filter
Top Products
117
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode /
Hybrid Auto Mode
3
Other Shooting Modes
4
P Mode
6
Playback Mode
5
Tv, Av, and M Mode
7
Setting Menu
8
Accessories
9
Appendix
Index
Removing All Images from a Photobook
Still Images
Movies
● Following the procedure in “Choosing
a Selection Method” (
=
116), choose
[Clear All Selections] and press the [ ]
button.
● Press the [
][ ] buttons to choose [OK],
and then press the [ ] button.
Using an Eye-Fi Card
Still Images Movies
Before using an Eye-Fi card, always conrm that local use is permitted
(
=
2).
Inserting a prepared Eye-Fi card enables automatic wireless transfer of
images to a computer or uploading to a photo-sharing website.
Images are transferred by the Eye-Fi card. Refer to the card’s user
manual or contact the manufacturer for instructions on preparing and
using cards or resolving transfer problems.
● When using an Eye-Fi card, keep the following points in mind.
- Cards may continue to transmit radio waves even when [Eye-
Fi trans.] is set to [Disable] (
=
118). Remove the Eye-Fi
card before entering hospitals, aircraft, or other areas where
transmission is prohibited.
- When troubleshooting image transfer issues, check the card
and computer settings. For details, refer to the card’s user
manual.
- Poor Eye-Fi connections may cause image transfer to take a
long time, and transfer may be interrupted in some cases.
- Eye-Fi cards may become hot, due to their transfer functions.
- Battery power will be consumed faster than in normal use.
- Camera operation may become sluggish. To resolve this, try
setting [Eye-Fi trans.] to [Disable].