Filter
Top Products
25
E
Quick Overview
Using the LCD Screen
Push the LCD panel open button and open the
panel by pulling it away from the camera. This
automatically switches the LCD screen on and the
viewfinder off. When you close the LCD panel,
the LCD screen automatically switches off and the
viewfinder switches back on.
Open the LCD screen
First open out the LCD panel at a right angle (90°)
to the camera.
Changing the angle of the LCD screen
You can now choose the angle of the panel that
suits you best by rotating it backwards (up to
180°) and forwards (up to 90°) about this axis.
If you rotate the panel backwards around to 180°
you can allow the subject to monitor the shot in
the LCD screen or you can include yourself in the
picture. The viewfinder is also activated when the
panel is in this position.
From this position you may also push the panel
flat against the camera, with the screen facing
outwards.
90
K
Notes:
• Avoid touching the LCD screen when moving the LCD panel.
• Do not hold the camera by the LCD panel or the viewfinder.
• Make sure you open the LCD panel at 90°, before attempting to rotate it backwards or forwards.
• Always rotate the LCD panel vertically into place, before closing it or pushing it flat against the side of
the camera.
• Always fully close the LCD panel when it’s not in use.
• Be careful not to leave the LCD, viewfinder or lens exposed to direct sunlight outdoors or in a window.
Doing so could cause damage.
• Bright light falling on the LCD screen may cause glare that makes it difficult for you to view the image.
In this case, switch to using the viewfinder. You are also able to adjust the brightness of the screen (see
“Adjusting the LCD screen” p. 26).