Filter
Top Products
41
E
Using the Full
Range of Features
Six-second auto date
The six-second auto date appears for six seconds to mark the changeover of a day if the tape was being
recorded at 12:00 midnight. It also appears for six seconds when you start playback and have the data
code turned off. The six-second auto date will adjust for any time zone changes you have indicated.
You can turn the six-second auto date on:
1. Turn the POWER switch to VCR.
2. Open the menu and select 6SEC.DATE.
3. Select ON and close the menu.
Note:
• When 6SEC.DATE is turned on and DISPLAYS (p. 95) is turned off, the six-second auto date appears
for six seconds.
6SEC.DATE•••OFF
(see p. 34)
Date and time display
You can choose to display or hide the date and time display during recording. When the date and time
display is set to ON, the date and time show in the display but the time zone disappears in about four
seconds. It is not recorded onto your tape.
D/T DISPLAY•OFF
(see p. 34)
1. Put the camera in record pause mode.
2. Open the menu and select D/T DISPLAY.
3. Select ON and close the menu.
1. Turn the POWER switch to VCR.
2. Open the menu and select D/TIME SEL.
3. Choose between DATE, TIME and DATE & TIME.
4. Press the MENU button to close the menu.
Setting the display style
Select whether you want the date, the time, or both to show up on your data code display (p. 66).
D/TIME SEL.•DATE & TIME
(see p. 34)