Canon GL1 Camcorder User Manual


 
75
E
Editing
Copyright signal
Certain pre-recorded software tapes are copyright protected. If you try to play back such a cassette,
“COPYRIGHT PROTECTED PLAYBACK IS RESTRICTED” appears in the display for a few seconds
and then the camera displays a blank blue screen; you cannot view the contents of the cassette.
If you try to record from such a tape via the digital cable “COPYRIGHT PROTECTED DUBBING
RESTRICTED” appears in the display; you cannot record the contents of the tape.
Digital video equipment fitted with this terminal lets you edit, copy and transfer data digitally, with
virtually no generation loss in image and sound quality. The DV terminal is for both line-in and line-out,
since a single DV cable can handle data in both directions.
If another Canon digital video camcorder is connected, the Dubbing Function can be used for digital-to-
digital dubbing (i.e. with virtually no generation loss in image quality).
If a VCR is connected and an anomalous signal is sent from the VCR, the images recorded on the tape
may also be anomalous (although it may not appear so on the TV image), or not recorded at all.
You may not be able to dub tapes recorded with the copyright protective signal.
Use a Canon CV-150F DV cable (optional) to connect two digital devices together. When you are
recording from the GL1, make sure you connect the cable to the GL1 before connecting the other end of
the cable to the recording device. When you are recording to the GL1, slide the POWER switch to VCR
and press its 2 (record) and a (pause) buttons down simultaneously, or press the REC PAUSE button on
the wireless controller (“DV IN” appears in the display when you press “play” on the playback device).
Then press its pause button to start/pause recording.
The image displayed by the camcorder that is being recorded to (for example on its LCD screen, an
attached TV, or in its viewfinder) may become distorted during digital dubbing. The actual recording on
the tape, however, is not affected.
Blanks between recordings on the playback tape are recorded as anomalous images on the tape that is
being recorded to.
Do not turn the power off when operating either camcorder with the DV cable connected.
DV terminal/connections
Dubbing with Digital Video Equipment
REW
PLAY
FF
REC
PAUSE
SEARCH
SELECT
ZERO SET
MEMORY
AUDIO
DUB.
STOP
A/V
INSERT
PAUSE
SLOW
+ /
/
×2