Filter
Top Products
126
The camera can reconnect to a Web service for which connection settings have
been registered. The connection to the access point only has to be established
once. You do not need to establish a new connection for each Web service.
1
Select [Wi-Fi function].
Under the [51] tab, set [Wi-Fi/NFC]
to [Enable], then select [Wi-Fi
function].
2
Select [m].
Select [m] (Upload to Web service)
and press <0>.
3
Select a Web service.
Select a Web service and press
<0>.
X When the [Send to] screen (p.125) is
displayed, select a destination and go
to step 4.
4
Establish a connection.
Select [Connect] and press <0>.
On the confirmation dialog, select
[OK].
X The camera will reconnect to the Web
service.
When settings for multiple connection destinations are registered,
select [Choose set.], select the connection destination, then
connect to the destination.
Reconnecting