Filter
Top Products
153
If a problem occurs with the camera, first refer to this Troubleshooting
Guide. If this Troubleshooting Guide does not resolve the problem,
contact your dealer or nearest Canon Service Center.
Set [51: Wi-Fi/NFC] to [Disable]. When it is set to [Enable], you
cannot use the camera by connecting it to a computer, printer,
GPS receiver, TV set, or other device with a cable (p.18).
[51: Wi-Fi/NFC] cannot be set to [Enable] if the camera is
connected to a computer, printer, GPS receiver, TV set, or other
device with a cable (p.18).
Operations such as shooting and playback are not possible during
a wireless LAN connection. Terminate the connection, then
perform the operation.
Even with a combination of the same camera and smartphone, if
you have changed the settings or selected a different setting,
reconnection may not be established even after selecting the same
SSID. In such a case, delete the camera connection settings from
the Wi-Fi settings on the smartphone and set up a connection
again.
If Camera Connect is left running while setting up a connection
again, the connection may not be established. In such a case,
restart Camera Connect.
Troubleshooting Guide
A device connected with a cable cannot be used.
[Wi-Fi/NFC] cannot be set to [Enable].
Operations such as shooting and playback are not
possible.
Cannot reconnect to a smartphone.