Filter
Top Products
75
Connection via WPS (PIN Mode)
4
Select [WPS (PIN mode)].
Press the <W> <X> keys to select
[WPS (PIN mode)], then press <0>.
Select [OK] and press <0> to go to
the next screen.
5
Specify the PIN code at the
access point.
At the access point, specify the 8-digit
PIN code displayed on the camera’s
LCD monitor.
For instructions on setting PIN codes
at the access point, refer to the
access point’s instruction manual.
After the PIN code is specified, select
[OK] and press <0>.
6
Connect to the access point.
Select [OK] and press <0> to
establish a connection with the
access point.
X When a connection with the access
point is established, the next screen
is displayed.