Filter
Top Products
14
The basic operation for setting the camera’s wireless LAN functions is
explained here. Follow the procedures below.
1
Select [Wi-Fi/NFC].
Under the [51] tab, select [Wi-Fi/
NFC], then press <0>.
2
Select [Enable].
Press the <Z> key to select
[Enable], then press <0>.
When this setting is selected for
the first time, a screen to register a
nickname (for identification) is
displayed. See page 20 to register a
nickname.
X [Wi-Fi function] under the [51] tab is
now selectable.
When it is set to [Enable], all
connections via the DIGITAL and
HDMI terminals will be disabled.
[Eye-Fi trans.] will be set to
[Disable].
3
Select [Wi-Fi function].
Under the [51] tab, select [Wi-Fi
function], then press <0>.
Basic Operation and Settings