Filter
Top Products
74
This is a connection mode available when using an access point
compatible with WPS. In PIN code connection mode (PIN mode), an 8-
digit identification number specified on the camera is set at the access
point to establish a connection.
Even if there are multiple access points active in the surrounding
area, a relatively reliable connection can be established using this
shared identification number.
It may take approx. one minute to establish a connection.
1
Select [Wi-Fi function].
Under the [51] tab, set [Wi-Fi/NFC]
to [Enable], then select [Wi-Fi
function].
2
Select an item.
Select either [q], [l] or [o], then
press <0>.
3
Select [Infrastructure mode].
Displayed when [q] or [l] is
selected. Go to step 4 when selecting
[o].
Press the <W> <X> keys to select
[Infrastructure mode], then press
<0>.
Select [OK] and press <0> to go to
the next screen.
Connection via WPS (PIN Mode)