Filter
Top Products
62
This section explains how to connect the camera and Connect Station
(sold separately) via a wireless LAN. To save images in other ways,
refer to the Connect Station instruction manual.
Set up the camera to allow use of its NFC function in advance
(p.28).
1
Set up the camera to allow use of
its NFC function (p.28).
2
Hold the camera close to the
Connect Station.
Turn on the camera and Connect
Station, then hold the camera’s p
mark close to the Connect Station’s
NFC connect point.
X A message indicating the connection
is displayed on the camera’s LCD
monitor.
When a connection is established,
Connect Station checks the images
on the memory card, then saves only
the unsaved images.
3
Terminate the connection.
After images are saved, the screen
on the left will appear on the camera’s
LCD monitor. Press <0> to
terminate the connection.
Saving Images
NFC connect point