Filter
Top Products
Components Guide 15
LCD Monitor
Switching between Modes
Pressing the Display button switches the LCD monitor display mode.
Shooting
• Pressing the Display button cycles the LCD monitor to the next mode each time the
button is pressed. The order is on (no information) / on (information view) / off.
• The LCD monitor’s display mode [on (no information); on (information view); LCD
monitor off] is memorized when the camera is turned off. When the camera is
turned on again it assumes the last mode. However, when the LCD monitor is
turned on and the low battery icon
appears, the LCD monitor may not
automatically turn on the next time the camera is started.
• Changing the shooting mode will cause the LCD monitor to display relevant
information for about six seconds when it is turned on regardless of whether the
information view mode is on or off.
• Setting the mode dial to
or turns on the LCD monitor regardless of
whether it is set to on or off.
• The camera shake warning icon will appear at the center of the LCD monitor in
low light conditions while the camera is preparing to shoot. When this icon
appears, use the flash or fix the camera to a tripod to shoot.
Replaying
• The LCD monitor turns on when the main dial is turned to .
• Pressing the Display button switches the information view mode.
Single Replay: Simple Display ➞ Detailed Display ➞ No Display
Multi Replay: Simple Display ➞ No Display