Filter
Top Products
66 Shooting - Selecting Particular Effects
• To set and use a custom white balance setting, it is advisable to select the
shooting mode and set the exposure compensation and flash exposure
compensation to zero (±0). The correct white balance may not be obtained when
the exposure is incorrect (image is completely black or white).
• It is also desirable to use the LCD monitor to compose the shot and to zoom in to
the maximum telephoto setting.
• Since a custom white balance setting cannot be set in
mode, pre-set the white
balance in another shooting mode first before selecting the
mode.
• If the flash fires when setting a custom white balance with the flash set to auto or
red-eye-reduction auto, use the flash when you go to shoot too. The correct white
balance cannot be obtained unless the flash is used consistently. To ensure
consistency, set the flash to on or off as appropriate.
• The selected shooting mode will determine whether or not the custom white
balance setting is cancelled when the camera is turned off (p. 79).