Filter
Top Products
42 Shooting - Letting the Camera Select Settings
• The fastest shutter speed for flash synchronization is 1/250 second. The camera
automatically resets the shutter speed to 1/250 second if a faster speed is selected.
• The flash may take up to approximately 10 seconds to charge in some cases.
Actual times will vary according to usage and the battery charge.
• The flash will fire at full strength in
mode.
• The flash will automatically adjust its output in the
, , , , , , ,
, and modes.
• The flash setting is saved when the camera is turned off in the
, , and
shooting modes.
• The flash will fire twice. A pre-flash will fire just before the shutter closes and will
be followed by the main flash. The pre-flash is used by the camera to obtain the
subject’s exposure data so that the main flash can be set to the optimal intensity
for the shot.
About the Red-Eye Reduction Function
A subject’s eyes can appear red in an image shot with a flash in dim lighting due
to light reflecting back from the eye’s blood vessels, which is known as the red-eye
phenomenon. The red-eye reduction lamp fires a soft pre-flash that causes the
pupils to contract, thereby lessening the chances of the eyes appearing red when
the main flash fires.
- Tell human subjects to look at the lamp since the function will not have any
effect if the subject is not looking at the red-eye reduction lamp.
- The effect is made stronger by increasing the room lighting or by approaching
closer to the subject.