Filter
Top Products
Shooting - Letting the Camera Select Settings 41
Using the Built-In Flash
Use the built-in flash according to the guidelines below.
* No icon appears in the display panel in Auto mode.
1
Press the button to switch between
flash modes.
• The selected flash mode will show in the
display panel. It will also appear on the LCD
monitor if it is on.
2
Shoot the image.
• The flash will fire if the indicator beside the
viewfinder shines orange when the shutter
button is pressed halfway.
• Shooting procedures are the same as for the
Auto mode (p. 37).
Built-in Flash Settings
The flash cannot be used with some shooting modes.
(Auto)
(Red-eye reduction,
Auto)
(Red-eye reduction,
Flash on)
(Flash on)
(Flash off)
●
●
*
-
-
●
-
-
-
-
●
*
-
-
●
●
●
*
-
-
●
●
●
*
-
-
●
●
●
*
-
-
●
●
●
*
-
-
-
▲
▲
*
●
*
●
●
●
●
●
●
*
●
●
●
●
●
●
●
●
*
●
●
*
●
●
●
●
*
●
●
●
●
(Auto)*
(Red-eye reduction, Auto)
(Red-eye reduction, Flash on)
(Flash on)
(Flash off)
The flash fires automatically as required by the lighting level.
The red-eye reduction lamp always fires but the flash only fires as
required by the lighting level.
The red-eye reduction lamp and the flash always fire.
The flash always fires.
The flash does not fire.
* Default setting.
●
Setting selection is possible.
▲
Setting can only be selected for the first image.
-
Setting selection is not possible.