Filter
Top Products
Shooting - Letting the Camera Select Settings 39
Checking an Image Right after Shooting
Checking the Image
The following explains ways to view the photographed image in addition to
viewing it for 2 seconds in the LCD monitor when it has been opened.
Keeping the Shutter Button Pressed
The image will continue to display in the LCD monitor as long as you keep the
shutter button fully depressed.
Pressing the Set Button
If you press the Set button while the image is displayed in the LCD monitor, it will
continue to display even after the shutter button is released. Press the shutter
button halfway again to stop displaying it.
• There is a shortcut for erasing the image while it is displayed (p. 9).
Changing the Image Display Duration
With the Review function set to the default value, the photographed image
displays for 2 seconds. You can turn it off or set it for 10 seconds.
1
In the [ (Rec.)] menu, select [Review].
• See Selecting Menus and Settings (p. 35).
2
Select a Review setting and press the
Menu button.
• With the [Off] option, the image will not
automatically display. However, you can view it
if you keep the shutter button held down.
• With the [2 sec.] or [10 sec.] options, the image
automatically displays for the set duration even
if the shutter button is released.
• You can display the image longer than the 2-
or 10-second duration by keeping the shutter
button depressed or by pressing the Set button
while it is displayed.
• Another picture can be taken even while the
last is displayed.