Filter
Top Products
Printing Maintenance
44
Print Head Cleaning
If missing lines or white stripes are found in the printed nozzle check pattern, perform Print
Head cleaning to unclog the Print Head Nozzles. Cleaning the Print Head consumes ink, so
perform Print Head cleaning only when necessary.
1 Ensure that the printer is turned on.
2 Open the Printer Properties dialog box.
See "OOpening the Printer Properties Dialog Box Directly from the Start Menu" on
page 26.
3 Start Print Head Cleaning.
Note
• The print head can also be cleaned by pressing the R
RESUME/CANCEL button
on the printer.
1. Ensure that the printer is turned on.
2. Hold down the R
RESUME/CANCEL button until the PPOWER lamp flashes
once, and then release it.
• If you pressed the Cleaning button on the Examining the Nozzle Check
Pattern screen displayed after nozzle check pattern printing, start the Print
Head cleaning procedure from 3-(3).
(1) Click the MMaintenance tab.
(2) Click CCleaning.
QSG_Print_Head_Cleaning.fm Page 44 Wednesday, May 19, 2004 5:35 PM