Filter
Top Products
Printing Maintenance
48
(4) When the confirmation message is displayed, click OOK.
Print Head deep cleaning starts when the P
POWER lamp starts blinking.
Do not perform any other operations until the Print Head deep cleaning is
completed (about one minute).
1 Ensure that the printer is turned on.
2 Open the BJ Printer Utility dialog box.
(1) Double-click the hard disk icon where the printer driver was installed, the
Applications folder, and then the U
Utilities folder.
(2) Double-click the P
Printer Setup Utility icon.
If you are using the OS other than Mac OS X v.10.3, double-click the P
Print Center
icon.
(3) Select i
iP2000 from the NName list and click UUtility or CConfigure.
(4) Select i
iP2000 from the PProduct list and click MMaintenance.
Note
Click the I
Initial Check Items button. Confirmation message for Print Head
deep cleaning is displayed.
QSG_Print_Head_Deep_Cleaning.fm Page 48 Wednesday, May 19, 2004 5:35 PM