Filter
Top Products
Printing Maintenance
52
1 With the printer on, load a sheet of Letter-sized plain paper in the printer.
Move the Paper Thickness Lever to the left position.
2 Open the BJ Printer Utility dialog box.
(1) Double-click the hard disk icon where the printer driver was installed, the
Applications folder, and the U
Utilities folder.
(2) Double-click the P
Printer Setup Utility icon.
If you are using the OS other than Mac OS X v.10.3, double-click the P
Print Center
icon.
(3) Select i
iP2000 from the NName list and click UUtility or CConfigure.
(4) Select i
iP2000 from the PProduct list and click MMaintenance.
3 Print the pattern.
(1) Select Test Print from
the pop-up menu.
(2) Click P
Print Head Alignment.
(3) Click PPrint Head Alignment.
When the confirmation
message is displayed, click O
OK.
The Pattern will be printed.
Note
Click C
Check
Setting to print
the current setting
and finish the
operation.
QSG_Aligning_Print_Head.fm Page 52 Wednesday, May 19, 2004 5:36 PM