Filter
Top Products
Printing Maintenance
46
3 Start Print Head Cleaning.
(4) If you want to print the nozzle check pattern, click PPrint Check Pattern.
Otherwise, click C
Cancel to finish.
See "E
Examining the Nozzle Check Pattern" on page 42.
Important Do not perform any other operations until the Print Head cleaning
finishes. This takes about 40-50 seconds.
Note
• If this does not solve the problem, clean the Print Heads again,
up to three times.
• After Print Head cleaning finishes, print the nozzle check pattern
to verify that the Print Head Nozzles are clean.
See "PPrinting the Nozzle Check Pattern" on page 39.
• If the problem remains, try Print Head deep cleaning.
See "PPrint Head Deep Cleaning" on page 47.
(1) Select CCleaning from the
pop-up menu.
(2) Click CCleaning.
(3) When the confirmation
message is displayed,
click O
OK.
QSG_Print_Head_Cleaning.fm Page 46 Wednesday, May 19, 2004 5:35 PM