Filter
Top Products
Printing Maintenance
45
(3) When the confirmation message is displayed, click OOK.
(4) If you want to print the nozzle check pattern, click P
Print Check Pattern.
Otherwise, click C
Cancel to finish.
See "E
Examining the Nozzle Check Pattern" on page 42.
1 Ensure that the printer is turned on.
2 Open the BJ Printer Utility dialog box.
(1) Double-click the hard disk icon where the printer driver was installed, the
Applications folder, and the U
Utilities folder.
(2) Double-click the P
Printer Setup Utility icon.
If you are using the OS other than Mac OS X v.10.3, double-click the P
Print Center
icon.
(3) Select i
iP2000 from the NName list and click UUtility or CConfigure.
(4) Select i
iP2000 from the PProduct list and click MMaintenance.
Important Do not perform any other operations until the Print Head cleaning
finishes. This takes about 40-50 seconds.
QSG_Print_Head_Cleaning.fm Page 45 Wednesday, May 19, 2004 5:35 PM