Filter
Top Products
Printing Maintenance
50
Aligning the Print Head
If ruled lines are displaced or the print result is unsatisfactory, Print Head alignment is
required.
ì
1 With the printer on, load a sheet of Letter-sized plain paper in the printer.
Move the Paper Thickness Lever to the left position.
2 Open the Printer Properties dialog box.
See "OOpening the Printer Properties Dialog Box Directly from the Start Menu" on
page 26.
3 Print the pattern.
(1) Click the MMaintenance tab.
(2) Click PPrint Head Alignment.
(3) Click PPrint Head Alignment.
When the confirmation message is
displayed, click O
OK.
The Pattern will be printed.
Note
Click C
Check Setting to
print the current
setting and finish the
operation.
QSG_Aligning_Print_Head.fm Page 50 Wednesday, May 19, 2004 5:36 PM