Filter
Top Products
14 Before Printing
Loading Envelopes
Envelopes must be fed from the Auto Sheet Feeder. Use either European DL or US Comm. Env.
#10-sized envelope.
1 Retract the Paper Support.
2 Load the envelope against the Cover Guide
(the right side of the Paper Support).
Load with the front face UP and the rear flaps
DOWN on the left.
A maximum of 10 envelopes can be loaded at
once.
3 Pinch the Paper Guide and slide it against the
left side of the envelope.
4 Set the Paper Thickness Lever to the right.
5 Specify the settings in the printer driver.
(1) Select Envelope in Media Type.
(2) Select the size for envelopes.
In Windows, select DL Env. or Comm. Env. #10 in Page Size.
In Macintosh, select DL Envelope (Mac OS X v.10.4.x or 10.3.x), Long Envelope (Mac
OS X v.10.2.8), or #10 Envelope in Paper Size.
For details on printer driver settings, see “Printing with Windows” on page 15 or “Printing with
Macintosh” on page 16.
Important
z Do not use envelopes with embossed or treated surfaces, a double flap, pressure seals, or
sticker flaps.
z Select either DL Env. (Windows)/ DL Envelope (Mac OS X v.10.4.x or 10.3.x)/ Long Envelope
(Mac OS X v.10.2.8) or Comm.Env. #10 (Windows)/ #10 Envelope (Macintosh) in the printer
driver according to the envelope size you are using. If you do not, the address will be printed in
the wrong direction.
Important
Envelopes may not be fed properly if the Paper
Support is extended.
Important
Make sure that the Cover Guide is set upright.
*1
*2 2
3
*1 Printing orientation
*2 Make sure the flaps are folded.
1
4