Filter
Top Products
40 Routine Maintenance
Aligning the Print Head
If ruled lines are printed misaligned or print results are otherwise unsatisfactory, adjust the print head
position.
1 Make sure that the printer is on and load two sheets of A4 or Letter-sized plain
paper in the Auto Sheet Feeder.
Set the Paper Thickness Lever to the left.
2 Open the Front Feeder and extend the Output Paper Support.
3 Open the printer properties dialog box.
4 Click the Maintenance tab and then Print Head Alignment.
5 When the confirmation message is displayed,
click Print Head Alignment.
6 After the pattern is printed, click Yes.
Note
You cannot feed paper from the Front Feeder when performing Print Head Alignment. Always load paper
in the Auto Sheet Feeder.
Important
You cannot print the print head alignment pattern if paper of size other than A4 or Letter is loaded.
Be sure to use A4 or Letter-sized plain paper.
Important
Do not open the Top Cover while printing.
Note
Clicking Check Setting prints the current settings and
finishes Print Head Alignment.