Filter
Top Products
26 Chapter 1
Before Printing
(A) If the Auto Sheet Feeder runs out of paper, the paper source automatically changes to the
Cassette.
Procedure:
1 Press [Menu] repeatedly to select <DEVICE SETTINGS>.
2 Use [ ] or [ ] to select <PRINT SETTINGS>, and press [OK].
3 Use [ ] or [ ] to select <AUTO FEED SWITCH>.
4 Press [OK].
5 Use [ ] or [ ] to select whether to switch the paper source automatically.
6 Press [OK].
7 Press [Stop/Reset].
Changing the Paper Source
Before printing, confirm that the location where you have loaded paper is selected as a paper
source. Press [Feed Switch] to change the paper source.
Note
For information on page size, media type, and paper support load limit for the Auto Sheet
Feeder or Cassette, see “Recommended Paper and Requirements” on page 22.
ON: Switches the paper source automatically.
OFF: Switches the paper source by pressing [Feed Switch] on the Operation Panel.
(A)
PRINT SETTINGS
W
AUTO FEED SWITCH
AUTO FEED SWITCH
W
OFF