Filter
Top Products
96 Chapter 7
Changing the Machine Settings
z MAN/AUTO SWITCH
If you select <MANUAL MODE> or <ANS. MACHINE MODE> as the receive mode,
enables/disables the machine to switch to fax receive mode after ringing for a specified
length of time.
z REMOTE RX
Enables/disables remote receiving.
If you select <ON>, selects the remote receiving ID.
z RX IMG REDUCTION
Enables/disables automatic reduction of faxes to fit the paper loaded.
z RX START SPEED
Selects the speed at which the machine starts receiving.
z RX REPORT
Enables/disables automatic printing of a reception report after receiving.
If you select <PRINT ERROR ONLY> or <PRINT FOR EACH RX>, prints a reception
report only when a print error occurred or every time you receive a fax.
OTHERS
AUDIBLE TONES
Selects the volume.
z KEYPAD VOLUME
Selects the beep volume when pressing the buttons on the Operation Panel.
z ALARM VOLUME
Selects the alarm volume.
PWR SAVE SETTING
Specifies the time to switch the machine to the Power Saver mode.
COUNTRY SELECT
Selects the country where you are using your machine. This setting is not available in some
countries and regions.
LANGUAGE SETTING
Selects the language for LCD messages.
RESTORE DEFAULT
You can change the settings back to the settings on your purchase (some data may not be reset
depending on your usage condition).
RX START TIME: Selects the length of time the machine rings before switching to
fax receive mode.
REDUC. DIRECTION: If you select <ON> as <RX IMG REDUCTION>, enables
selecting the direction of the reduction.