Filter
Top Products
Chapter 7
Chapter 7 91
Changing the Machine Settings
Changing the Machine Settings
Changing the Settings
This section describes the procedure to change the settings on <DEVICE SETTINGS>, taking the
steps to specify <EXTENDED AMOUNT> as an example.
1 Press [ON/OFF] to turn on the machine.
See “Turning on the Machine” on page 18.
2 Press [Menu] repeatedly to select <DEVICE SETTINGS>.
3 Select the menu.
(1) Use [ ] or [ ] to select the setting item, then press [OK].
Example: select <PRINT SETTINGS>.
The setting screen for the selected item is displayed.
(2) Use [ ] or [ ] to select the menu, then press [OK].
Example: select <EXTENDED AMOUNT>.
4 Change the settings.
(1) Use [ ] or [ ] to select the setting item, then press [OK].
Example: select <SMALL>.
PRINT SETTINGS
QUIET MODE
Use this function if you want to reduce the operation noise, such as when printing at night.
PREVENT ABRASION
Use this setting only if the print surface becomes smudged.
Important
z The printing speed may be reduced compared to when this setting is set to <OFF>.
z This function may not be so effective depending on the print quality setting.
z Furthermore, certain noise, such as when the machine is preparing for printing, is not
reduced.
PRINT SETTINGS
QUIET MODE
X
PRINT SETTINGS
W
EXTENDED AMOUNT
X
EXTENDED AMOUNT
SMALL
X