Filter
Top Products
34 Chapter 1
Before Printing
(2) Open up and set the Paper Output Tray Extension completely by pressing down the
hollow on its front side.
(3) Press [Feed Switch] so that the Cassette Lamp (A) lights.
z Loading Envelopes
Use either European DL or US Comm. Env. #10 size envelopes.
1 Align the envelope stack against the right side of the Cassette with the print side
face down, and the rear flaps up on the left side.
2 Slide the Paper Guides against the sides of the envelope.
Note
You can also select the paper source with the printer driver. For details, refer to the Printer
Driver Guide.
Important
z Envelopes can be used only when printing from a computer.
z Do not use envelopes with embossed or treated surfaces, a double flap, pressure seals or
sticker flaps.
z Select either [DL Env.] or [Comm. Env. #10] according to the envelope size you are using.
z If the print image is upside down when printing onto special envelopes, open the printer
properties dialog box then select the [Rotate 180 degrees] check box on the [Page Setup]
tab.
For information on the printer driver settings, refer to the Printer Driver Guide.
Note
A maximum of 5 envelopes can be loaded at once.
(1)
(2)
(3)
(A)