Filter
Top Products
Network
To WAN side
Internet
Router
Computer
To LAN port
To LAN port
LAN port /
Ethernet
connector
Modem
Required system
n Broadband Internet connection
A broadband line connection to the Internet is required in order to
use the DVP-602CI’s firmware update.
n Modem
This is a device that is connected to the broadband line to
communicate with the Internet. Some are integrated with the
router.
n Router
• When using the DVP-602CI, we recommend you use a router
equipped with the following functions:
· Built-in DHCP (Dynamic Host Configuration Protocol) server
This function automatically assigns IP addresses on the LAN.
· Built-in 100BASE-TX switch
When connecting multiple devices, we recommend a switching
hub with a speed of 100 Mbps or greater.
n Ethernet cable (CAT-5 or greater recommended)
• The DVP-602CI does not come with an Ethernet cable.
• Some flat type Ethernet cables are easily affected by noise.
We recommend using a normal type cable.
• If the sound is broken in an environment in which there is much
power supply noise from electric products or in a noisy network
environment, use a shielded type Ethernet cable (For America
Canada model).
• For the Ethernet cable, used a shielded twisted pair (STP) cable.
Do not use an unshielded twisted pair (UTP) cable, as it may exceed
noise standard limits (For European model).
n Computer
A computer with the following specifications is required to use a
web control:
• OS
Windows
®
XP Service Pack2, Windows Vista
• Internet browser
Microsoft Internet Explorer 5.01 or later
• LAN port
• 300 MB or more free disk space
NOTE
• A contract with an ISP is required to connect to the Internet.
No additional contract is needed if you already have a broadband
connection to the Internet.
• The types of routers that can be used depend on the ISP. Contact an
ISP or a computer shop for details.
For connections to the Internet, contact an ISP (Internet Service
Provider) or a computer shop.
n Others
• If you have an Internet provider contract for a line on which
network settings are made manually, make the settings at GUI
menu “Setup” – “Network Setup” (vpage 18, 19).
• With the DVP-602CI, it is possible to use the DHCP and Auto IP
functions to make the network settings automatically.
• When using a broadband router (DHCP function), the DVP-602CI
sets the IP address, etc., automatically.
When using the DVP-602CI connected to a network with no DHCP
function, make the settings for the IP address, etc., at GUI menu
“Setup” – “Network Setup” (vpage 18, 19).
• The DVP-602CI is not compatible with PPPoE. A PPPoE-compatible
router is required if you have a contract for a line of the type with
which the PPPoE is set.
• Depending on the ISP with which you have your contract, it may
be necessary to make proxy server settings to use the Network
function. If you made proxy server settings on the computer to
connect to the Internet, make the proxy server settings on the
DVP-602CI in the same way.
Carefully check the inputs and outputs, and be sure to interconnect
correctly.
Connections to Other Devices
Getting Started Connections Setup Playback Information Troubleshooting Specifications
For firmware update and web control.
DVP602CI_ENG_6th.indd 13 2008/03/26 16:37:22