Filter
Top Products
External Controller
RS-232C connector
This connector is used for an external controller.
b If you wish to control the DVP-602CI from
an external controller using the RS-232C
connector, perform the operation below
beforehand.
q Turn on the DVP-602CI’s power.
w Turn off the DVP-602CI’s power from the
external controller.
e Check that the DVP-602CI is in the standby
mode.
Trigger output jack
The power of an external device equipped with
a trigger input jack can be turned on and off in
association with operations on the DVP-602CI.
For details, see GUI menu “Setup” – “Option
Setup” – “Trigger Out” (vpage 20).
• Output level: 250 mA / 12 V
Check the trigger input conditions of the
connected device.
NOTE
Insert the AC plugs securely. Incomplete connections could cause noise.
Wait until all connections have been completed before connecting the power cord.
Power cord
(included)
Connecting the Power Cord
Turning the Power On
(vpage 24)
Once Connections are Completed
"69
065
Input
Output
Infrared
retransmitter
Infrared sensor
Extension jack for future use.
North America model
AC 120 V, 60 Hz
To household
power outlet
European models
AC 230 V, 50 Hz
Getting Started Connections Setup Playback Information Troubleshooting
Specifications
DVP602CI_ENG_6th.indd 14 2008/03/26 16:37:24