Filter
Top Products
18 19
2.1 ACCESSING YOUR DVR REMOTELY
Once you have configured the network settings on the DVR to match those on your router and
forwarded the ports needed by the DVR to enable remote access over the Internet, you will be
ready to remotely view your cameras using a webcam program based on an ActiveX control.
For this to work, you will have to enable the ActiveX control options that are built into Internet
Explorer. It is strongly suggested that you be running the latest version of Internet Explorer
(currently IE9). As of this writing, the QS434 is being updated to work with IE9. In the interim,
continue to use IE 8. The instructions below will describe the process using both version 8
and 9 of Internet Explorer.
ACCESSING THE DVR USING INTERNET EXPLORER
User Account Control for Windows Vista and Windows 7
Some users of computers using Windows Vista or Windows 7 operating systems may receive
an error message informing of a codec that is missing or not installed. This conflict can be
resolved by turning off User Account Control (UAC).
Windows Vista
STEP 1. Open the Control Panel
(accessible by clicking on the
Windows icon in the lower left of your
screen.
STEP 2. Select User Accounts and
Family Safety.
STEP 3. Select “Add or Remove User
Account.”
PICTURE 2-1
PICTURE 2-2
PICTURE 2-3
REMOTE MONITORING
CHAPTER 2
Microso Office Outlook 2007
Scky Notes
All Programs
Devices and Printers
Default Programs
Help and Support
Shut down
iTunes
Adobe Acrobat
uac
PICTURE 2-7
PICTURE 2-5
PICTURE 2-6
STEP 4. Select the desired user account.
STEP 5. Select Turn User Account
Control on or off
STEP 6. Uncheck the box next to “Use
User Account Control (UAC) to help
protect your computer.”
STEP 7. You will then be asked to restart
your computer for the change to take
effect.
Windows 7
STEP 1. Open up the Start Menu
(accessible by clicking on the
Windows icon in the lower left of your
screen.
STEP 2. Type “uac” into the search bar
and hit ENTER. The User Account
Control will open or you will be offered
a link to click to open it.
STEP 3. Move slider to lowest setting
and press OK.
PICTURE 2-4