Filter
Top Products
15
Software Installation
Web Configuration
The Internet Camera must be configured through its built-in, Web-based
Configuration.
From the web browser, enter the default IP address (192.168.0.20) to access
the Welcome screen of the Internet Camera. To configure your Internet Camera
type “http://192.168.0.20” in the address box of your favorite Web Browser.
The number is the default IP address of your Internet Camera. Press Enter.
Note:
The PC’s IP address must correspond with the Internet Camera’s IP address
in the same segment (i.e. PC=192.168.0.5, Camera=192.168.0.20) for the
two devices to communicate. For instructions on how to do this, please
access instructions for installing any of the D-Link Broadband Gateway
products from support.dlink.com/products. The DI-713 or DI-714 are good
products to use as an example as their Quick Install Guides are the most up-
to-date.
Main Menu Image
After the default IP address is entered from the browser, the Internet Camera
Home screen will appear with a still image. There will be three options to choose
from to set-up and view your Internet Camera and they are as follows:
View Image – ActiveX Mode
View Image – Java Mode
System Administration