D-Link DCS-1000 Digital Camera User Manual


 
8
LEDS
LED stands for Light-Emitting Diode.
Power LED
The Power LED is positioned on the right side of the Internet Camera lens
while facing the Internet Camera. Steady blue confirms that the Internet Camera
is powered on.
Note:
There are three settings for the Power LED to control the light illumination for
monitoring purposes: Normal / Off / Dummy. Please refer to the Web
Configuration section for detailed information and usage.
LAN/WLAN LED (Wireless Internet Camera only)
The LAN/WLAN LED is positioned on the right side of the Internet Camera’s,
lens while facing the Internet Camera. It is located to the right of the Power
LED
Steady orange confirms good connection to the LAN or WLAN.
Dependent on the data traffic the LED will begin to flash to indicate that the
Internet Camera is receiving/transceiving from/to the LAN or WLAN network.
Note:
There are three settings for the LAN/WLAN LED to control the light illumination
for monitoring purposes: Normal / Off / Dummy. Please refer to the Web
Configuration section for detailed information and usage.