Filter
Top Products
35
In the View Image – Java Mode you are allowed two output trigger options and
one image upload option. Just click on the desired selection ON or OFF to
utilize the options for each of the functions.
Note 1:
Output trigger will send a 5V signal to the device connected to the Internet
Camera. A maximum of two devices is permitted to connect to the Internet
Camera to utilize the output trigger function. Please refer to appendix for detailed
information.
Note 2:
The Administrator has the authority to allow users the permission to set the
output trigger functions through the Users setting in the System Administration
menu bar.
IPView Application Installation
Installation
To install the IPView application
click on the IPView button to acti-
vate the installation procedure for
the application program.
Date/Time*** - The date/time of the Internet Camera will show the date and time which
comes either from the time server or from manual settings.
Insert the CD-ROM into the CD-
ROM drive to initiate the auto-run
program.
A menu screen will appear as
shown at right.
Camera Name* - The Camera name will be display when the Camera Name field is entered
in the Web Configuration setting under “System”
Location** - The location of the Internet Camera will be displayed when the Location field is
entered in the Web Configuration settings under “System.”
Note 3:
The Administrator has the authority to allow users to set the image upload
functions through the setting in the Upload in the System Administration menu
bar.