D-Link DCS-1000 Digital Camera User Manual


 
62
Schedule
Allows customized settings to start recording specified by date or by week. Check
the Recording Schedule box to enable this option. Select By Date and enter
in the dates, Stop, and Start Times. The camera will start to record according to
the specified date and time period entered. Select By Week to indicate specific
days to record and the time period.
Motion Detection
This menu sets up motion detection for the camera. Click on Motion Detection
to enable motion detection. Click on Alarm Beep to enable audio notification
once motion is detected and Recording Active to start recording once motion is
detected. The Sensitivity Level can also be adjusted. Be sure to Apply your
settings and click on OK to exit this menu and save your changes.