Filter
Top Products
Using Advanced Features
5-1
B
5
hen PhotoPC is connected to your Macintosh, you
can customize several of the camera’s settings. You can also
take pictures by controlling the camera directly from your
Macintosh. This chapter describes the following:
❙ Getting ready to use advanced features
❙ Setting the clock
❙ Setting auto shut-off
❙ Setting the shutter speed
❙ Adjusting port settings
❙ Taking pictures from your Macintosh.
Getting Ready to Use Advanced Features
You use the PhotoPC Settings software to work with advanced features.
Follow these steps to get started:
1
Connect the camera to your Macintosh as described in Chapter 3.
5
Using Advanced Features
W
2
Turn on both the camera and your Macintosh system.
3
Double-click the PhotoPC Settings icon, shown below, in the
PhotoPC software folder.
The Camera Controls window appears, as shown on page 5-2.