Filter
Top Products
5-4
Using Advanced Features
To set the shutter speed, follow these steps:
1
Connect the camera to your Macintosh as described in Chapter 3
and open the Setup window as described on page 5-1.
The Shutter Speed slider is set to Auto.
2
Drag the slider to the left to reduce the shutter speed, or to the right
to increase the shutter speed. The shutter speed range is from 1/30
second to 1/10,000 second.
3
When you are finished, click OK.
Adjusting Port Settings
You can use PhotoPC Settings to adjust the computer connection for
PhotoPC. You need to adjust these settings if you see an error message
when you connect the camera. You may also want to experiment with
the speed setting to decrease the time it takes to transfer pictures to your
Macintosh.
Click to change port for camera
connection
Click to change speed for
transferring pictures
Drag to set shutter speed